Was jeweils wohin geflash wird - vergleiche auch hier: https://www.cardroid.org/2014/12/04/analyse-av7/
Code: Alles auswählen
Partition Gerät File
/misc /dev/block/mmcblk0p1 <-- Bootloader uboot.bin
/bootlogo /dev/block/mmcblk0p2 <-- logo.bmp
/recovery /dev/block/mmcblk0p3 <-- recovery.img
/boot /dev/block/mmcblk0p4 <-- boot.img
/system /dev/block/mmcblk0p5 <-- system.img
/data /dev/block/mmcblk0p6 <-- restlicher Speicher für die Userdaten
/cache /dev/block/mmcblk0p7 <-- Cache Partition
/dev/block/mmcblk0p8 <-- PQ.bin
/dev/block/mmcblk0p9
/dev/block/mmcblk0p10 <-- Backuppartition: hier kommt rein: system.img.lzo, recovery.img, boot.img
/sdcard /dev/block/mmcblk0p11 <-- der restliche "interne" Speicher für /sdcard im StockRom
Daher ist das File mit den Paritionsinfos wichtig:
Code: Alles auswählen
# misc partition(512KB)
emmc create misc 0x00080000
# bootlogo partition(6MB)
emmc create bootlogo 0x00600000
....
Das "x" zeigt dabei an, dass es sich um hexadezimale Werte handelt.
Ein Rechenbeispiel:
Wir wollen die Backuppartition vergrößern auf 580MB.
580MB entsprechen 608174080 Bytes Hilfe
593920 in hexadezimal ergibt 0x24400000 Hilfe
Also müssten wir schreiben:
Code: Alles auswählen
# backup partition(580MB)
emmc create backup 0x24400000